oscilent corporation product specification oscilent corporation telephone: 1.949.252.0522 fax: 1.949.252.0522 email: sales@oscilent.com product specification www.oscilent.com rev a january 2011 oscilent controlled document ordering code / part number product description 821-if70.0m-07a 70.0 mhz if saw filter 7.28 mhz bandwidth specification contents o mechanical dimensions o test circuit o maximum ratings o electrical specification o frequency response o smith chart o vswr notes o electrostatic sensitive device (esd) o avoid excessive ultrasonic exposure o solderability compatible with jedec j-std-020c pb-free process, 260c peak reflow temperature o this product complies with eu dire ctive 2002/95/ec (rohs compliance)
oscilent part number 821-if70.0m-07a january 2011 rev a 70.0 mhz if saw filter 7.28 mhz bandwidth product specification p. 1 www.oscilent.com mechanical dimensions (mm) test circuit pin description a, b, c, d, f, g, h, i ground j input e output test fixture & values input l1 = 180 nh, c1 = 43 pf output l2 = 220 nh, c2 = 36 pf source/load impedance 50 ?
oscilent part number 821-if70.0m-07a january 2011 rev a 70.0 mhz if saw filter 7.28 mhz bandwidth product specification p. 2 www.oscilent.com maximum ratings parameters description unit minimum typical maximum operating temperature range c - 25 - storage temperature range c -40 - 85 maximum dc voltage v - - 10 maximum input power dbm - - 10 source impedance (single ended) (1) ? - 50 - load impedance (single ended) (1) ? - 50 - notes: with matching network (ref. test ing environment circ uit as shown above). those impedances could be modified wi th different impedance values and/or structures, if necessary. electrical specification parameters description unit minimum typical maximum center frequency (fo) mhz - 70.0 - insertion loss at fo db - 27.7 29.0 group delay variation at fo 3.5 mhz nsec - 50 100 absolute delay at fo usec - 3.36 - passband ripple variation at fo 3.5 mhz db - 0.55 1.0 bandwidth at -1db mhz 7.28 - bandwidth at -10db mhz - 8.09 - bandwidth at -20db mhz - 8.46 - bandwidth at -25db mhz - 8.59 - bandwidth at -35db mhz - 8.78 - ultimate rejection db 45 50 - temperature coefficient ppm/c - -20 -
oscilent part number 821-if70.0m-07a january 2011 rev a 70.0 mhz if saw filter 7.28 mhz bandwidth product specification p. 3 www.oscilent.com frequency response bandwidth at ?1.0 db bandwidth at ?10.0 db bandwidth at ?20.0 db bandwidth at ?35.0 db
oscilent part number 821-if70.0m-07a january 2011 rev a 70.0 mhz if saw filter 7.28 mhz bandwidth product specification p. 4 www.oscilent.com ripple variation fo3.5mhz group delay variation fo3.5mhz smith chart
oscilent part number 821-if70.0m-07a january 2011 rev a 70.0 mhz if saw filter 7.28 mhz bandwidth product specification p. 5 www.oscilent.com vswr
|